Skip to content
UPDATE: We are now offering bespoke glass cut to size. Call us for details on 033 3303 4059
UPDATE: We are now offering bespoke glass cut to size. Call us for details on 033 3303 4059
Support Bars Explained

Support Bars Explained

In the design phase of your shower enclosure you may find that structurally the fixed panel needs extra support. Usually you would use a U Channel and you could clamp it to the wall alternatively you can go for a support bar. On our website there are a wide range of options. If you are not sure you can go for a kit set. Alternatively you can buy all components separately. This means that you need an individual bar (please check specs to make sure its long enough) and then you will need a glass to bar fitting (make sure this fits the thickness of glass you have) and lastly you will need a fitting to clamp to the wall, so in total three parts. The bar is simply cut to size and the wall fitting is drilled into place, The glass to bar fitting is fitted into place and tightened with a supplied Alan key. If you are having difficulty please contact us and we can tie together the necessary pieces.

 

Next article Our Range Of Products