Mirror Products, Mastics and Adhesives

Gunther Seal-Kwik has a safe, proven formula for protecting mirror edges from "black edge". Seal-Kwik goes on fast and easy with a sponge-dauber to...

Gunther Prime-N-Seal is a superior, quick drying acrylic primer and sealer designed to help eliminate mirror installation failure. It enhances the ...

Gunther Premier® Plus Mirror Mastic is a high-quality, urethane based adhesive formulated to provide a strong, permanent bond between electro-coppe...

Gunther Ultra/Bond Mirror Mastic is a high quality adhesive formulated to provide a strong, permanent bond between electro-copper-plated glass mirr...

CRL Mirror Mounting Set Professional LD for 2.6 m² (using 6 mm glass). Includes metal plates, edge turned down, straps and press butto...

CRL Mirror Mounting Set Professional LD for 1.6 m² (using 6 mm glass). Includes metal plates, edge turned down, straps and press butto...

CRL Mirror Mounting Set Professional LD for 0.8 m² (using 6 mm glass). Includes metal plates, edge turned down, straps and press butto...

CRL Mirror Mounting Set Professional EM for 2.6m² (using 6 mm glass). Includes metal plates, edge turned down, centre discs and magnet...

Mirabac Polypropylene Mirror Backing. The SAFECOAT BOPP 600 film is tested to (latest European Standard) BS EN 12600 and has a Class 2B2 pass.

Aluminium mirror backing tape with linear

A soft Aluminium Foil coated with a long lasting acrylic adhesive with a release liner to protect the adhesive face. Complies with Class 0 and Clas...

The 600mm x 45m Aluminium Tape with Liner protects the back of the mirror against moisture ingress. 600mm x 45m

This Mirror Defogger is designed to be installed in new and retrofit applications that allow at least 1/16" (1.6 mm) space behind the m...

This Mirror Defogger is designed to be installed in new and retrofit applications that allow at least 1/16" (1.6 mm) space behind the ...

This Mirror Defogger is designed to be installed in new and retrofit applications that allow at least 1/16" (1.6 mm) space behind the ...

This Mirror Defogger is designed to be installed in new and retrofit applications that allow at least 1/16" (1.6 mm) space behind the ...

CRL Angle Extrusions are designed for mirror wall installations and other applications. Angle extrusions can be used as inside and outside corners....

ighly polished Flat Face Mirror Edge Molding may be used in place of the upper J-Channel in mirror installations to provide an even sight line at t...

CRL Standard J-Channels are individually polywrapped to prevent scratching during shipping and at the construction site. The back leg is punched an...

CRL Deep Nose J-Channel is individually polywrapped to prevent scratching, plus the back leg is punched and slotted for easier installation. Deep N...