Brushed Stainless Z-Series Round Type (51 mm) Radius Base Stainless Steel Clamp for (10 mm) Glass

Description

• For 3/8" (10 mm) Glass
• Use Monolithic Tempered Glass
• Use on Mezzanines, Partitions, Railings and Windbreaks
• Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
• Custom Painted Finishes Available Upon Request
  

More Details

• Width: 2-9/32" (58.1 mm)
  

• Height: 2-1/8" (54 mm)

• Tube Diameter: 2" (51 mm)

Additional Information

For securing the Z-Clamp to thin wall tubing (less than 1/8"), use CRL's ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32" (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16" Mandrel and Nosepiece.

NOTE: 1/2" (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support.

SPECIFICATIONS

• Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm)
• Base Design: Radius
• For Use With: 1-1/2" or 2" (38 or 50.8 mm) Diameter Round Tubing
• Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
• Glass Fabrication:
• For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm)
• Thick Glass: 1/2" (12 mm) notch is required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
• Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

Important Notes

For interior and exterior applications CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

Technical Documents

Glass Fabrication Template (AutoCAD)

Glass Fabrication Template (PDF)

Product Drawing (AutoCAD)

Product Drawing (PDF)

Z-Clamp Tightening Sequence (PDF)