Skip to content
UPDATE: We are now offering bespoke glass cut to size. Call us for details on 033 3303 4059
UPDATE: We are now offering bespoke glass cut to size. Call us for details on 033 3303 4059

Z-Series Round Type Radius Base Zinc Clamps for (10 mm) Glass

Original price £0.00 - Original price £0.00
Original price £0.00
£17.44
£17.44 - £19.08
Current price £17.44
SKU Z210GP

Need your glass cut?

We now offer a bespoke glass cutting service

📱 Call us now on  033 3303 4059

Color: Gold Plated

Description

Our CRL Z-Series Round Type Radius Base Glass Clamps are designed to be used on glass thickness of 1/4" up to 1/2" (6 to 12 mm), and are available in either zinc or stainless steel. The clamps are the perfect solution for partitions, railings, windbreaks and countless other projects.

  • For 3/8" (10 mm) Glass Zinc Casting
  • For Use on Mezzanines, Partitions, Railings and Windbreaks
  • Use Monolithic Tempered Glass
  • Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  • Custom Painted Finishes Available Upon Request

More Details

  • Width: 2-9/32" (58.1 mm)
  • Height: 2-1/8" (54 mm)
  • Tube Diameter: 2" (51 mm)

    Additional Information

    For securing the Z-Clamp to thin wall tubing (less than 1/8"), use CRL's ZB0LT Socket Head Cap Bolt and ZRNUT Rivet-Nut. For installation, drill a 17/32" (13.5 mm) hole, then install the Rivet-Nut using 34604 Heavy-Duty Thread Insert tool and 34618 5/16" Mandrel and Nosepiece.

    NOTE: 1/2" (12 mm) notch is required if using the steel pin (included with the clamp) for additional glass support. Replacement gaskets are available by ordering CRL Cat. No. Z14RG.

    SPECIFICATIONS

    • Glass Thicknesses: Models for 1/4" to 1/2" (6 to 12 mm)
    • Base Design: Radius
    • For Use With: 1-1/2" or 2" (38 or 50.8 mm) Diameter Round Tubing
    • Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
    • Glass Fabrication: For 1/4" (6 mm), 5/16" (8 mm), and 3/8" (10 mm) Thick Glass: 1/2" (12 mm) notch is required if using provided steel pin for glass support. For 1/2" (12 mm) Thick Glass: 9/16" (14 mm) diameter hole required if using provided steel pin for glass support.
    • Includes: Rubber Gaskets and Steel Pin (for optional use) with Grommet

    Important Notes

    For interior CRL recommends pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.

    Technical Documents

    Glass Fabrication Template (AutoCAD)

    Glass Fabrication Template (PDF)

    Product Drawing (AutoCAD)

    Product Drawing (PDF)

    Z-Clamp Tightening Sequence (PDF)