Z-Series Square Type Flat Base Zinc Clamps (6mm-8mm)

• Clamp Type: Square Type Flat Base Glass Clamp
• Style: Flat base
• Glass Thickness: 6mm-8mm
• Use On: Mezzanines, Partitions, Railings and Windbreaks
• Glass Type: Monolithic Tempered Glass
• Material: Zinc or stainless steel
  
• Includes: Rubber Gaskets and Steel Pin (for Optional Use) with Grommet. Steel Pin Available for Additional Glass Support Tested and Engineered to Meet and Exceed Code Standards (Engineering Reports)
  
• Size: Width: 54 mm x Height: 54 mm
  

Templates

• Glass Fabrication Template (AutoCAD)
• Glass Fabrication Template (PDF)
• Product Drawing (AutoCAD)
• Product Drawing (PDF)
• Z-Clamp Tightening Sequence (PDF)

Additional Information

• For 1/4" and 5/16" (6 and 8 mm) Glass
  Replacement Gaskets are Available by Ordering Cat. No. Z14SG
• For securing the Z-Clamp to thin wall tubing (less than 1/8"), use a socket head cap bolt and a ZRNUT rivet-nut.
• For installation, drill a 13.5 mm hole, then install the Rivet-Nut a heavy duty thread Insert tool and a Mandrel and Nosepiece.
• 12 mm hole is required if using the steel pin (included with the clamp) for additional glass support.
• For Use With: Square Tubing or Other Flat Surfaces
• Material: Choice of Zinc Constructed or Stainless Steel. Stainless Steel or Powder Painted Zinc Clamps are recommended for more durability in exterior applications.
• For 6 mm, 8 mm, and 10 mm Thick Glass a 12 mm diameter hole is required if using provided steel pin for glass support.
• For 12 mm Thick Glass: a 14 mm diameter hole is required if using provided steel pin for glass support.

Important Notes

For interior we recommend pinning each glass panel as required when the glass is not supported from the bottom edge to prevent glass panel slippage. Rubber gaskets and steel pins are provided with each clamp.